08-31-2017 06:17 AM - edited 03-19-2019 12:45 PM
Hello,
Setting up Microsoft Deployment Server (WDS)
Have Cisco layer 3, users on separate VLAN, DHCP server on same Layer 3 switch
Created new VM Host, connected to trunked port on same switch
WDS server on vlan 15, subnet 192.168.15.0
Users on VLAN 25, 192.168.25.0
PXE deployment not getting IP from DHCP on VLAN 25
IP helper address need to added to DHCP scope ?
Solved! Go to Solution.
08-31-2017 08:32 AM
If your clients do not have a DHCP server on their local subnet then you will need a helper address.
08-31-2017 07:27 AM
You're posting in the Unified Communications Applications area, probably want to move your thread to a relevant area.
08-31-2017 08:32 AM
If your clients do not have a DHCP server on their local subnet then you will need a helper address.
12-19-2017 02:43 PM
Helper address fixed, thanks !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide