cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4408
Views
5
Helpful
9
Replies

Location out of Resources Event

tcmckay
Beginner
Beginner

This is the error I get. The problem is that I only have one location and I have removed all bandwidth restrictions but I still get this event. This only started about 2 weeks ago. No users have reported poor voice quality or dropped calls. As well our bandwidth monitors show that the incoming and outgoing SIP trunks never go above 80% usage. I have used the RTMT to see if I can catch the issue in progress. So far RTMT has not reported anything concerning.

 

Description:

 

This alert occurs when LocationOutOfResource event is generated. This indicates that one or all of audio or video or immersive bandwidth for a location or link is used up.

 

 

Recommended Action:

 

The location or link running out of resources can be identified via RTMT tool  Performance->Cisco Location LBM. Consider allocating additional bandwidth for location or link running out of resources.

 

 Name : XXXX

ResourceType : 2

AppID : Cisco Location Bandwidth Manager ClusterID : ccm-pub.corp.local NodeID : ccm-sub  TimeStamp : Wed Nov 06 08:32:17 MST 2019.

The alarm is generated on Wed Nov 06 08:32:17 MST 2019.

1 Accepted Solution

Accepted Solutions