02-04-2012 11:33 AM - edited 03-19-2019 04:20 AM
I have setup Message notification to a cellphone. When a message is left, it does call the cell phone but will only ring it once and disconnect. Is that normal or can you change it to ring it more than once?
02-04-2012 09:04 PM
Hi,
What Unity Version in use?
02-05-2012 06:58 AM
Hi James,
On the Notification Device page I would try increasing
the "Rings to wait" number
* | |
seconds | |
* | |
minutes | |
* | minutes |
* |
Cheers!
Rob
02-05-2012 01:10 PM
Rob, I am running version 8.6.1 and do not see all of these settings. Are they not available in this verision
02-06-2012 05:27 AM
Hi James,
When I open up the config for Mobile Phone (for example) these options are
available, but this is in CUC 7.1(3B)su2. If they aren't there in 8.6 I might look at
the Related Links Field;
Step 12 Optionally, to configure additional settings for the device for an individual user, use the Related Links field to navigate to Edit Notification Device Details. The Connection Messaging Assistant opens in another browser window, allowing you to change the notification schedule or limit the notification to messages sent by specific callers or phone numbers. The user can also change these settings by signing in to the Connection Messaging Assistant.
Note The Related Links field appears in the upper right corner of the Administration window. Select the applicable link name, and then select Go. |
Cheers!
Rob
02-06-2012 08:12 AM
Hi Rob,
'
I am not even seeing the Related Links Field in 8.6, why would that be?
02-06-2012 09:50 AM
Hi James
This is from an 8.6(1) system. Definitely has those settings available:
Could you send a screen shot of what you can see within the Notification Device?
Barry
02-06-2012 10:23 AM
02-06-2012 10:29 AM
Aha. Unity Express not Unity Connection. The instructions provided so far will not be valid.
I will need to try and find a test system that I can connect to. I am sure you can configure this, but it's been a while since I've configured CUE.
EDIT: This seems to be a global setting. The attached is from a CUE 7.0 system, but should apply to 8.x as well .
From the main CUE admin gui, go to Voicemail -> Message Notification -> Notification Administration.
You should see something similar to the attached. Please note this system is not set up for any notifications at all, but hopefully this will assist in knowing where to look.
Barry
02-07-2012 07:38 AM
I updated that and it did not make any difference. Still only calls and rings once.
02-07-2012 05:30 AM
Nice one Barry +5
I guess it helps if we are all talking about the same system...my BAD!!
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide