08-21-2013 12:09 PM - last edited on 03-25-2019 09:50 PM by ciscomoderator
Is there an option to turn off mobile connect from the user option page in CUCM 9.1?
Solved! Go to Solution.
08-22-2013 10:32 AM
In addition to the wonderful points from Chris, there is a service parameter in UCM to turn on/off Mobile connect from user web page.
Please rate useful posts.
08-22-2013 09:02 AM
Yes, the remote destination shows up as alternate number, see the screen shot:
08-22-2013 09:11 AM
Thats what I thought, I do not have this option on my users web page. Is there somewhere in CUCM i need to go so the user has the option?
08-22-2013 09:17 AM
You need to make sure the end user is checked as mobile user and that the RD is associated with the proper end user.
HTH,
Chris
08-22-2013 09:27 AM
It is and mobile connect works just fine so not sure why this is not an option for me. On my Alternate number I only see the lines:
08-22-2013 10:32 AM
In addition to the wonderful points from Chris, there is a service parameter in UCM to turn on/off Mobile connect from user web page.
Please rate useful posts.
08-22-2013 11:47 AM
Perfect, it was in the Enterprise Parameters - Show Mobility Features Options.
I was looing in Service Parameters.
Thank you for the help
08-22-2013 11:50 AM
Sorry, my bad. Thanks for the rating.
Please rate useful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide