07-19-2011 01:43 PM - edited 03-19-2019 03:18 AM
There is no field on Port group configuration on Unity connection web application page for Sip Trunk like is is for SCCP. Unity connection can take message but the MWI doesnt not light on. It is configured in CUCM / advanced features / voice mail/ Message waiting. Is there something else that need to be programmed?? Thanks
07-19-2011 03:13 PM
Hi Diane,
This is because SIP trunks will basically use an MWI On/Off flag in the SIP messages, there aren't actual DN's configured on the UC side like SCCP, as you've realized. Detailed CUCM traces should hopefully shed some light on why MWI may not be going on/off for you.
Hope that helps,
Brad
01-06-2012 07:42 AM
HI All,
did this get resolved.
Many thanks
01-06-2012 07:58 AM
MWI works just fine with SIP integration to UCON, are you having a specific issue?
Chris
02-07-2012 08:09 AM
Hi Chris,
Unity connections works fine except the MWI and i cannot see anything obvious that would stop it.
02-07-2012 08:15 AM
Do you have ports on UCON configured with MWI checkbox?
You can try restarting the Notified service on UCON.
Chris
02-07-2012 08:37 AM
HI, The ports are checked for all features and i seem to remember restarting the service whilst on site last.
reagards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide