01-13-2005 07:44 AM - edited 03-18-2019 04:05 PM
Hi,
We have MCS 7835H 3.0 ECS1 on which Unity 4.0(4) is installed.I have installed the operating system using Cisco provided CDs.I am able to see only one network card in Network Properties.I wanted to configure NIC teaming.
I require a good document on NIC teaming - Fault Tolerant with Active Passive config.
pl let me know if any one has configured the same.
Regds
Kiran
01-13-2005 08:27 PM
Configuring Dual NICs in the Cisco Unity Server
Using the Cisco Media Convergence Server Network Teaming Driver with Operating System Version 2000.2.7
http://www.cisco.com/univercd/cc/td/doc/product/voice/iptel_os/driver/hp_team7.htm
01-13-2005 09:59 PM
Hi,
Thanks for replying.I am aware that we can team the NIC card using the HP network in the control panel
Problem is I am not able to see the second NIC card.
Looks like the second NIC card is disabled in BIOS.
I wanted the procedure to enable in the BIOS & configure using CPQNTAC as mentioned in the doc.
Regds
Kiran
01-14-2005 03:56 AM
Hi Kiran,
Restart your server and pressione F9 when the prompt ask F9/F10/F11..
In PCI Devices, you can enable the second Nic Card..
After that, download the drives and the lastest version of NCU (7.0) and configure the team using AFT or NFT, depends of your model...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide