NIC Teaming

[k.ms]

Hi,

We have MCS 7835H 3.0 ECS1 on which Unity 4.0(4) is installed.I have installed the operating system using Cisco provided CDs.I am able to see only one network card in Network Properties.I wanted to configure NIC teaming.

I require a good document on NIC teaming - Fault Tolerant with Active Passive config.

pl let me know if any one has configured the same.

Regds

Kiran

[Hin Lee]

Configuring Dual NICs in the Cisco Unity Server

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_guide_chapter09186a008022b8ac.html#wp1592700

Using the Cisco Media Convergence Server Network Teaming Driver with Operating System Version 2000.2.7

http://www.cisco.com/univercd/cc/td/doc/product/voice/iptel_os/driver/hp_team7.htm

[k.ms]

Hi,

Thanks for replying.I am aware that we can team the NIC card using the HP network in the control panel

Problem is I am not able to see the second NIC card.

Looks like the second NIC card is disabled in BIOS.

I wanted the procedure to enable in the BIOS & configure using CPQNTAC as mentioned in the doc.

Regds

Kiran

[lomonaco]

Hi Kiran,

Restart your server and pressione F9 when the prompt ask F9/F10/F11..

In PCI Devices, you can enable the second Nic Card..

After that, download the drives and the lastest version of NCU (7.0) and configure the team using AFT or NFT, depends of your model...