02-12-2019 07:25 PM
Hello,
Is there any difference in term of performance between 2xPVDM3-64 and 1xPVDM-128? (I normally selected 2 RAM sticks for my PC instead of 1 (i.e 2x8 is more preferred than 1x16), but not sure if the same theory applies to PVDM)
Thanks,
hoanghiep
Solved! Go to Solution.
02-13-2019 04:31 AM
02-13-2019 06:06 AM
I agree with Jonathan (+5), also keep in mind in case you start looking at new routers the ISR4K which use PVDM4 only have one PVDM slot on the motherboard, so you would want to beep it up as much as possible up front.
Chris
02-13-2019 04:31 AM
02-13-2019 06:06 AM
I agree with Jonathan (+5), also keep in mind in case you start looking at new routers the ISR4K which use PVDM4 only have one PVDM slot on the motherboard, so you would want to beep it up as much as possible up front.
Chris
02-13-2019 07:45 PM
Thanks Jon and Chris for your answers. I used to select the larger DSP option too, but recently thought if the other option had advantage on performance and avoid single point of (DSP hardware) failure. Will stick with large DSP option.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide