cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1002
Views
4
Helpful
2
Replies

Recommended DSCP signalling

daniel.prinsloo
Level 1
Level 1

Can somebody please confirm the correct DSCP value for VOIP signalling. Is it AF31 or CS3?

2 Replies 2

Brandon Buffin
VIP Alumni
VIP Alumni

The new recommendation is CS3. Cisco is making the move to CS3, so new devices/software releases should mark signaling traffic as CS3. Currently, not all devices have been updated, so you will run across some that still mark at AF31. This change is due to the fact that signaling packets should never be dropped and packets marked AF31 can be dropped in some situations.

Hope this helps. If so, please rate the post.

Brandon

P.S. You will be able to change the DSCP values with Unity 5.0

Chris