Remove Line from IP Phone without Deleting Line

[SuperGenius]

How do I remove a line from an device in CM 6 without deleting the line. If I click on the line and click delete, then a warning shows up that I will permanently delete this directory number. If I try to remove the dn and click save, the directory number is required. What I want to do is move the line to another IP phone.

Thanks in Advance,

John

[Brandon Buffin]

John,

Go ahead and assign the DN to the new phone. When you assign a DN to a phone when it already exists on another phone in the same partition, it will show up as a shared line and many of the settings will automatically show up (caller ID, VM, etc.) You can then delete it from the original phone.

Hope this helps.

Brandon

[vyacheslav.k · Accepted solution]

go to Call Routing -> Directory Number, then choose a line you'd like to remove from the device. Enter this line.

Look for 'Associated Devices' which contains all phones associated with this line. Just select a appropriate phone and click an 'arrow to down'. This phone will be moved to 'Dissociate Devices' section. Click save. That's all.

[SuperGenius]

That's what I needed. Thanks!