05-21-2018 03:47 AM - edited 03-19-2019 01:21 PM
Hi Everyone,
can anyone help to find a solution to create a trunk between two different version of cucm
Site A : CUCM 10.5
Site B : CUCM 11.5
can we do inter cluster between two site...
please help if anyone one have documents please forward me on Vinney.h.koul@gsk.com
Regards
Vinney Koul
05-21-2018 06:14 AM
05-29-2018 02:52 AM
05-29-2018 02:47 PM
Hi there
Thats right. Go with SIP. The below document could be your best bud
Hope this Helps
Cheers
Rath!
***Please rate helpful posts***
05-29-2018 04:12 PM - edited 05-29-2018 05:03 PM
Hello Vinney,
As Nipun mentioned, we highly recommend to use the SIP protocol to configure trunks, since H.323 is not longer receiving any new features or development.
Referring to the CUCM SRND:
"While H.323 trunks are still supported, SIP trunks are the recommended trunk type for Unified Communication deployments because SIP trunks provide additional features and functionality not available with H.323 trunks."
I recommend you to check the following SRND and the System Configuration guide for more details (taken out of CUCM version 11):
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/trunks.html
Process is the same for 10.5.
Regards!
Ivan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide