01-22-2015 05:52 AM
Hello community,
just a question regarding what to do, if the machine code of an UAC Standard installation has changed.
There is an other NIC installed at the pc, so the machine code is changed.
At cisco.com/go/ac or cisco.com/go/license I cannot find anything about the process...
Thanks a lot.
Greetings, Chris
Solved! Go to Solution.
01-22-2015 12:19 PM
Hi Chris,
To re-license Cisco Unified Attendant Console Standard, contact Cisco TAC and request a re-host. You will need to provide them with either the original license activation codes or the SO number of your purchase.
This process is outlined on page 2-19 of the Installation Guide.
Thanks,
Matt
01-22-2015 12:19 PM
Hi Chris,
To re-license Cisco Unified Attendant Console Standard, contact Cisco TAC and request a re-host. You will need to provide them with either the original license activation codes or the SO number of your purchase.
This process is outlined on page 2-19 of the Installation Guide.
Thanks,
Matt
01-22-2015 09:55 PM
Hi Matthew,
great and thanks a lot for your help.
Thanks, Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide