10-04-2012 09:28 AM - edited 03-19-2019 05:39 AM
Hi,
I am upgrading Unity Version 8.0.3 to 8.6, my current CUCM version is 8.0.2. According to following link:
I will need to upgrade CUCM to 8.6 also, please confirm if this is the case, also can I upgrade to any CUCM 8.6 version available ?
thanks
hasrat
Solved! Go to Solution.
10-04-2012 09:32 AM
Hi Hasrat,
That doc just refers to the "tested" version but in fact any Unity Connection
version 2.1 or later will work with any CUCM version 4.1(3)or later
So you really don't need to upgrade CUCM at this time if you don't want.
Here's the clip;
Cisco Unity Connection 2.x and Later
Any version of Cisco Unity Connection 2.x or later is supported for use with any version of Cisco Unified CM 4.1(3) or later.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html
Cheers!
Rob
"May your heart always be joyful
May your song always be sung" - Bob Dylan
10-04-2012 09:32 AM
Hi Hasrat,
That doc just refers to the "tested" version but in fact any Unity Connection
version 2.1 or later will work with any CUCM version 4.1(3)or later
So you really don't need to upgrade CUCM at this time if you don't want.
Here's the clip;
Cisco Unity Connection 2.x and Later
Any version of Cisco Unity Connection 2.x or later is supported for use with any version of Cisco Unified CM 4.1(3) or later.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html
Cheers!
Rob
"May your heart always be joyful
May your song always be sung" - Bob Dylan
10-04-2012 09:38 AM
Hi Rob,
thank you for calrifying, I saw the document but missed the note.
thks again
hasrat
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide