01-24-2017 11:32 AM - edited 03-19-2019 12:02 PM
Hello,
I have a publisher/subscriber nodes and am attempting to upgrade.
I applied the following COP to the publisher:
And successfully installed UCSInstall_UCOS_11.5.1.11900-26.sgn to the publisher but did not switch versions.
I then tried to install UCSInstall_UCOS_11.5.1.11900-26.sgn to the subscriber, but the installation failed with unknown error. When I open the install log, I see a lot of the following message at the time of the failure:
01/24/2017 12:48:41 component_install|(CAPTURE) spawn sftp sftpuser@REMOVED|<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) Connecting to REMOVED...|<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) sftpuser@REMOVED's password: Permission denied, please try again.|<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) Permission denied, please try again.|<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).|<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) Couldn't read packet: Connection reset by peer|<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) initial args in: sftpuser@REMOVED|<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) prompt: 0|<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) verify: 0|<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) fingerprint: |<LVL::Debug>
01/24/2017 12:48:41 component_install|(CAPTURE) param in: sftpuser@REMOVED|<LVL::Debug>
The publisher's name has been replaced with REMOVED in this post for securty purposes
I have attached the install log
Please help!!
Thanks
01-24-2017 10:27 PM
01-25-2017 04:19 AM
I have rebooted the publisher and subscriber but that did not help. I believe I am not supposed to do a switch version on the publisher until the installation on the subscriber has finished?
The problem I am experiencing is installing the upgrade on the subscriber.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide