VG 224 Error while booting?

[Brian Cangero]

                   Hi,

This VG 224 is right out of the box and during the booting it displays these errors.

% Crashinfo may not be recovered at flash:crashinfo

% This file system device reports an error

Then when I tried to take a look at the flash it displayed

Router# dir flash

%Error opening slot0:/flash (File not found)

Does anyone know how to get rid of this error?

[Carlo Poggiarelli]

Hi Brian.

try dir all and see if it makes any difference.

You can also try to format your flash: put again the IOS into it and set the appropriate boot system command.

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

[Brian Cangero]

Carlo,

thanks for the info but I did try that and I found this

 It does not affect any functionality of the router. It only cautions the user about unrecoverable crashinfo, so that user may configure other modes of collecting the Crashinfo. 

Please configure:

exception crashinfo file slot0:crashinfo

Crashinfo would be written to the slot0 if the router crashes in the future.

[Carlo Poggiarelli]

Hi Brian.
Can you please post the output of a show file systems?

Thanks
Regards

Carlo

Sent from Cisco Technical Support iPhone App

[Kevin Monteiro]

The VG 224 does not have flash instead it has a slot, which is termed as slot0: the error generated is due to VG crash.

Hence the the crash file is in slot0.

To retrieve the same,the following command can be used :

Copy slot0 tftp

This should work.

Kindly rate the post accordingly.

Regards,
Kevin

Sent from Cisco Technical Support Android App