07-12-2011 06:33 AM
I am planning on upgrading my CUCM 7.1(5) cluster to version 8.5(1) and I am looking for the compatibilty information for 2800 series voice gateways.
I have searched around but cannot find the information, could someone help and point me in the correct direction please?
thanks
Solved! Go to Solution.
07-14-2011 03:41 PM
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp174059
This link has a section on Cisco IOS:
Refer to Cisco IOS Software compatibility information for Cisco Unified Communications Manager in the "Communications Infrastructure" section of the Cisco Unified Communications System Release Summary Matrix for IP Telephony at this URL:
See the lines for your appropriate function (SRST, ISR Voice DSP) and the desired CUCM version for the IOS versions that Cisco officially tests and lists as compatible. Note that Cisco doesn't go back and test all the older versions but many work (I have numerous gateways running 12.4(24)T4 with CUCM 8.5(1)SU1 with no issues for our usage - MGCP T1, MGCP FXO, H323 FXO, Transcoding, Conferencing).
07-14-2011 03:22 PM
Yes, I have a customer that is running version c2800nm-adventerprisek9-mz.124-22.T.bin. How do I find out if this is compatible with Version 8.5?
Thanks,
Charisse
07-14-2011 03:41 PM
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp174059
This link has a section on Cisco IOS:
Refer to Cisco IOS Software compatibility information for Cisco Unified Communications Manager in the "Communications Infrastructure" section of the Cisco Unified Communications System Release Summary Matrix for IP Telephony at this URL:
See the lines for your appropriate function (SRST, ISR Voice DSP) and the desired CUCM version for the IOS versions that Cisco officially tests and lists as compatible. Note that Cisco doesn't go back and test all the older versions but many work (I have numerous gateways running 12.4(24)T4 with CUCM 8.5(1)SU1 with no issues for our usage - MGCP T1, MGCP FXO, H323 FXO, Transcoding, Conferencing).
07-14-2011 03:53 PM
Yeah but the issue much from this other thread is https://communities.cisco.com/message/72871#72871
Cisco does a very poor job of going back and showing in one place minimum version is needed to support CUCM from IOS perspective. For example I am sure one could also have 12.4(20) or 12.4(15). However some IOS releases need CF/DRAM upgrades and I might want to stay back at an older version to save some costs. For H323 usually no such issues but with MGCP one needs to then look here at this link below
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf
The point is it is very fragmented and not consolidated well
Srini
05-15-2015 03:11 AM
Hi
I'm planing to upgrade CUCM 9.1(2)SU3, but recommended IOS version not available in the Cisco document, how can I find that ?
Regds
$
07-15-2011 11:15 AM
Thanks for the help/information.
I looked everywhere for the correct information and I dont know why I could not find it. When I finally did (15.1(3)T as I am running SRST) it stopped processing calls.
I put the IOS back to the version I was running before the upgrade (12.4(4)XC6) and calls are processing again. I guess this was never meant to be the simple IOS upgrade I had planned :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide