voice menu on ata190

[alainauer]

Hi,

I've found out that to access to the voice menu of an ATA190, I have to connect an analog phone on voice port 1, hook off and press Set up button on the front panel off the ATA190, but there is no Set up button!!!

Can someone help ?

[Gordon Ross · Accepted solution]

BugID: CSCut16498 Documentation error, there is no setup button.

GTG

[jkennedy111]

I had the same issue , seems there are 2 versions of the ATA 190

try the V1.1 documentation , it worked for me :

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190.html