Hi,
A costumer request : people of a department want to have the same personal contact list or share a contact list with jabber.
Is it possible to do that ?
Thanks for your help
Alain
Hi,
I want to configure SRST on a 2911 voice gateway, but when I try to enter the ip source address, I have the following error message :
'Configured ip address does not match any interface in given VRF. Pls configure a valid ip address'
Cisco 2911 ...
Hi,I've found out that to access to the voice menu of an ATA190, I have to connect an analog phone on voice port 1, hook off and press Set up button on the front panel off the ATA190, but there is no Set up button!!! Can someone help ?
Hi, The feature below was found in the cuac data sheet. When a call comes into a queue configured with operator handset ringing, the call is sent directly to the handset of the operator who has been logged into that queue the longest. This feature le...
Hi,I've using a CUCM 10.5.2 and a CUPS 10.5.2The CUCM is synchronized with the AD.In the CUPS --> client settings, the businessphoneNumber fields match with the ipPhone fields in the AD, but Jabber displays the telephoneNumber field of the AD.Can som...
I've configured an etherchannel and configured the IP adresse on it.
I've added two ethernet interfaces to the etherchannel.
address of the call manager : 192.168.228.1
address of the voice gateway : 192.168.228.9
the configuration below :
interface ...
After changing the file located in \Users\xxxx\AppData\Roaming\Cisco\Unified Communications\Jabber\CSF\Config\Cache, could I upload it to the TFTP server on the CUCM ?
Thanks Mohammed. I've just to find out the correct format of the xml file.Are the settings added to JabberLocalConfig.xml file located in the Users\...\AppData\Roaming\Cisco\Unified Communications\Jabber\CSF\Config folder ?
