cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3643
Views
0
Helpful
3
Replies

6248 Uptime

Gary Jackson
Level 1
Level 1

I received some SNMP errors this weekend stating the the port channels coming from my Nexus 5k's to my UCS 6248 Switches went down.  This caused a few issues.  I am trying to determine if the 6248UP's rebooted.  Can you please send me the commands to check their uptime?

1 Accepted Solution

Accepted Solutions

Marcin Latosiewicz
Cisco Employee
Cisco Employee
Gary, 

 

You can check it over NXOS,but check also for core files. 

 

 

ssh bdsol-6248-06 -l admin
Cisco UCS 6200 Series Fabric Interconnect
Password: 
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php

bdsol-6248-06-B# conn nx
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
bdsol-6248-06-B(nxos)# show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Software
  BIOS:      version 3.6.0
  loader:    version N/

  kickstart: version 5.2(3)N2(2.22c)
  system:    version 5.2(3)N2(2.22c)
  power-seq: Module 1: version v2.0
             Module 3: version v2.0
  uC:        version v1.2.0.1
  SFP uC:    Module 1: v1.1.0.0
  BIOS compile time:       05/09/2012
 kickstart image file is: bootflash:///installables/switch/ucs-6100-k9-kickstart.5.2.3.N2.2.22c.bin
  kickstart compile time:  5/21/2014 15:00:00 [05/22/2014 00:51:04]
  system image file is:    bootflash:///installables/switch/ucs-6100-k9-system.5.2.3.N2.2.22c.bin
  system compile time:     5/21/2014 15:00:00 [05/22/2014 02:17:46]

Hardware
  cisco UCS 6248 Series Fabric Interconnect ("O2 32X10GE/Modular Universal Platform Supervisor")
  Intel(R) Xeon(R) CPU         with 16553940 kB of memory.
  Processor Board ID FOC16490BRL

  Device name: bdsol-624806-B

  bootflash:   31266648 kB
Kernel uptime is 167 day(s), 8 hour(s), 39 minute(s), 21 second(s)

Last reset at 925225 usecs after  Tue Nov 18 09:09:24 2014
  Reason: Reset Requested by CLI command reload
  System version: 5.0(3)N2(2.11.3d)
  Service: 

plugin  
  Core Plugin, Ethernet Plugin, Fc Plugin, Virtualization Plugin

 

bdsol-6248-06-B(nxos)# show system uptime 
System start time:          Tue Nov 18 09:14:00 2014
System uptime:              167 days, 8 hours, 26 minutes, 36 seconds
Kernel uptime:              167 days, 8 hours, 41 minutes, 28 seconds
Active supervisor uptime:   167 days, 8 hours, 26 minutes, 36 seconds

 

 

 

To check for cores:

bdsol-6248-06-B# scope system 
bdsol-6248-06-B /system # top   
bdsol-6248-06-B# scope monitoring 
bdsol-6248-06-B /monitoring # scope sysdebug 
bdsol-6248-06-B /monitoring/sysdebug # show cores 

View solution in original post

3 Replies 3

Marcin Latosiewicz
Cisco Employee
Cisco Employee
Gary, 

 

You can check it over NXOS,but check also for core files. 

 

 

ssh bdsol-6248-06 -l admin
Cisco UCS 6200 Series Fabric Interconnect
Password: 
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php

bdsol-6248-06-B# conn nx
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
bdsol-6248-06-B(nxos)# show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Software
  BIOS:      version 3.6.0
  loader:    version N/

  kickstart: version 5.2(3)N2(2.22c)
  system:    version 5.2(3)N2(2.22c)
  power-seq: Module 1: version v2.0
             Module 3: version v2.0
  uC:        version v1.2.0.1
  SFP uC:    Module 1: v1.1.0.0
  BIOS compile time:       05/09/2012
 kickstart image file is: bootflash:///installables/switch/ucs-6100-k9-kickstart.5.2.3.N2.2.22c.bin
  kickstart compile time:  5/21/2014 15:00:00 [05/22/2014 00:51:04]
  system image file is:    bootflash:///installables/switch/ucs-6100-k9-system.5.2.3.N2.2.22c.bin
  system compile time:     5/21/2014 15:00:00 [05/22/2014 02:17:46]

Hardware
  cisco UCS 6248 Series Fabric Interconnect ("O2 32X10GE/Modular Universal Platform Supervisor")
  Intel(R) Xeon(R) CPU         with 16553940 kB of memory.
  Processor Board ID FOC16490BRL

  Device name: bdsol-624806-B

  bootflash:   31266648 kB
Kernel uptime is 167 day(s), 8 hour(s), 39 minute(s), 21 second(s)

Last reset at 925225 usecs after  Tue Nov 18 09:09:24 2014
  Reason: Reset Requested by CLI command reload
  System version: 5.0(3)N2(2.11.3d)
  Service: 

plugin  
  Core Plugin, Ethernet Plugin, Fc Plugin, Virtualization Plugin

 

bdsol-6248-06-B(nxos)# show system uptime 
System start time:          Tue Nov 18 09:14:00 2014
System uptime:              167 days, 8 hours, 26 minutes, 36 seconds
Kernel uptime:              167 days, 8 hours, 41 minutes, 28 seconds
Active supervisor uptime:   167 days, 8 hours, 26 minutes, 36 seconds

 

 

 

To check for cores:

bdsol-6248-06-B# scope system 
bdsol-6248-06-B /system # top   
bdsol-6248-06-B# scope monitoring 
bdsol-6248-06-B /monitoring # scope sysdebug 
bdsol-6248-06-B /monitoring/sysdebug # show cores 

Addionially ... your SNMP monitoring can give you that info.

 

Thank you.  Exactly what I needed.  It does show that my 6248 rebooted on Saturday as I expected with reason:

Kernel uptime is 2 day(s), 11 hour(s), 51 minute(s), 48 second(s)

Last reset at 145054 usecs after  Sat May  2 01:29:57 2015

  Reason: Reset triggered due to HA policy of Reset
  System version: 5.0(3)N2(2.11b)
  Service: monitor hap reset

 

Time to call TAC.

 

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card