I have several C240 M4 servers that I would like to manage as a group.I have installed the Cisco IMC_Supervisor, but it can't find eth0. ERROR = pcnet32 device eth0 does not see to be present, delaying initializationI need to be able to check/cha...
Does anyone know of a way to allow multiple groups to share the same template (image)? When you go into virtual computing, you're able to assign it to one group, but we want all groups to use that same template.
HelloI have 1 Cisco UCS 5108 Chasis with 4 Cisco UCS B200M4 Blade servers, VIC 1340, adapter firmware version 4.0 (1c) and the UCS Manager firmware version 2.2 (3c)I have one service profile with 12 VNIC for each blade and I saw the following vmnic i...
I'm trying to get a PAK so I can license UCS Central ... I can't seem to get it, I realize I'm supposed to purchase the free software in order to get a PAK, but I can't seem to do so. Can anyone help?
I cannot boot my blade to the iscsi boot lun after a patch and reboot. running esxi 5.5 and b200 m2 iqn is correct. any idea? I am stuck here. here is what I got from ucsm adapter 1/1/1 # connectNo entry for terminal type "dumb";using dumb terminal ...
Hi, Have received this syslog message on our UCS C210 server but not sure how to replace this battery. Apr 13 22:10:29 10.33.5.4 Apr 13 12:02:54 CISCO-IBMC storage: SLOT-5: Battery has failed and cannot support data retention. Please replace the batt...
Good morning to all, we just purchase an UCS C220 M4-S, but we only have one HDD, we are still waiting for the second one.I guess there is no problem in start working with VMware and the final VM, and later when the second disk is here make the RAID ...
Hi All, anyone come across a ql_ima.log file that fills up the /tmp folder on ESXi 5.5? we are running B200 M3 blades with Cisco ViC 1240. a quick search on the internet points to users having to update the qlogic driver to fix the issue. if we delet...
Hi AllI wanna a clear and simple explanation for the followingvlan port count optimizationport vlan membership I see many explanation at cisco.com but could not understand http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide...
Is it possible to apply multiple COS and bandwidth %'s to vNIC template on Fabric Interconnect? Issue Description:In UCS fabric the way we have planned our QOS is by classifying and marking on N1K and putting in respective QOS policy on Fabric Interc...
Can some one confirm the board controller compatibility for a B200 M3 server we operate at the firmware version 2.1(3d) and have just recieved new blades. They have come at the same firmware version yet the board controller is at version 13.0 whereas...
All, I am running UCS 2.2 (x) and testing service profile mobility for Hyper-V (windows 2012) and when I dis-associate from B200 M3 blade and try to associate to a new blade it's not seeing the boot LUN. The service profiles are identical and they ar...
Hi,I need to know how to find the physical serial number of a Cisco UCS Server. As the physical serial number provided is not same which is shown in the ESX for the server. And one person has said that its because the UCS gives a serial number (refer...
Greetings, I have a new VMware cluster consisting of four B200 M4 UCS blades all with Intel Haswell CPUs (2.3GHZ, 12 core). I am trying to enable EVC mode on the cluster (just in case of future expansion). VMware keeps telling me I am missing featu...
