02-09-2013 01:49 AM - edited 03-01-2019 10:52 AM
Hi all
I have several UCS C210 Server with a configured CIMC Interface. When I access the Servers from a local jumphost, everthing works fine.
If I access the server from my terminal Server, I don't get the login form. Just the site with the release infos.
The difference is, the from the terminal server I access the Interface trough a firewall (port 20, 443 and 2068 are open) with IExplorer 10 and NAT.
Is there a limitation on the browser or on the NAT? Or do I have to open some more ports on the firewall?
Thanks for your help
Best Regards, Daniel
Solved! Go to Solution.
02-09-2013 02:02 AM
Hello Daniel,
Can you please share screen shot of the web page when you try to access CIMC from terminal server ?
Does the system / browser have adobe flash plugin installed and working ?
Padma
02-09-2013 02:02 AM
Hello Daniel,
Can you please share screen shot of the web page when you try to access CIMC from terminal server ?
Does the system / browser have adobe flash plugin installed and working ?
Padma
02-09-2013 11:54 AM
Thanks Padma. The flashplayer was missing.
Without flash installed, the screen looks like this:
just install flash and you can login:
Thanks and have a nice weekend.
Cheers Daniel
02-09-2013 12:38 PM
But I have a further problem now.
I type in the user and password, but the browser does not go ahead. I just get the login again, without any error. After several time, i get the message:
The maximum number of user sessions has been reached.
With IExplorer 9 and FireFox I have no problem. This occures just with IExplorer 10 ...
Java and flash is enabled. I added the site to the trustet sites. Any recomendation, how to figure out, why its not working?
Cheers Daniel
02-10-2013 01:29 AM
Does CIMC web page works with Chrome or Firefox on Windows 2012 / 8 system ?
02-10-2013 04:12 AM
Yes with FireFox it works fine. Same TS as the IExplorer is installed.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide