C240M4 Server w/ Nvidia GRID K2 GPU, one Hyper V server can't see.

[Chun Ming Eric Law]

I have few C240M4 Server was install Nvidia GRID K2 GPU card, all install Hyper-V 2012R2 server, but find out one of the server in OS level cannot discover the GPU card, on the other hand in CIMC was show the GPU card attached, so any one know what is going on ? other don't have that issue, do  have any idea ?

[mjafri]

Hi Chun,

Have you installed the drivers? Can you see that in device manager? Please try to install the drivers by downloading it from the below link:

http://www.nvidia.com/download/driverResults.aspx/88811/en-us

Let me know if that works.

*Please do not forget to rate all useful posts.

Regards,

MJ

[Chun Ming Eric Law]

Hi MJ,

Actually I have install the driver, but dunno why can't see in the Hyper-v manager.

Regards 

Eric

[mjafri]

Hi Eric,

Thanks for the info. I don't have much expertise on Hyper-V, but it seems like u are looking for RemoteFX for your VMs, correct me if I'm wrong.

Are you able to see the GPU similar to below picture?

Regards,

MJ

[Chun Ming Eric Law]

Hello MJ,

Yes, but as I see the RemoteFX should be on, but don't why ? do you know any command that I can verify the RemoteFX is on or not ? 

[mjafri]

Hi Chun,

Here is the config guide: 

http://social.technet.microsoft.com/wiki/contents/articles/16652.remotefx-vgpu-setup-and-configuration-guide-for-windows-server-2012.aspx

Note: If you have Gen-2 VMs, RemoteFX is not supported.

Regards,

MJ