CIMC - Unable to access with admin password due to upgrade to 3.0(1C)

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-12-2018 08:55 AM - edited 03-01-2019 01:25 PM
Hello,
After upgrading the cimc to version 3.0(1C), unabe to connect to the web interface dur to the bug:
Defect ID : CSCvc76757
Symptom : Unable to log into Cisco IMC with version 3.0(1c) when password includes "+" or "=". This happens after upgrading from version 2.0(8d) to 3.0(1c).
So, how to upgrade to 3.0(1d) ?
Regards,
Fird
- Labels:
-
Other Unified Computing System

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-13-2018 10:31 AM
I would suggest a password reset which you should be able to accomplish via the CIMC config utility which can be accessed using the F8 break key during the boot sequence when prompted (this would appear at the same time as the BIOS or boot menu break key prompts appear.)
Once the password is reset, proceed with an upgrade as normal. Let me know if that works for you.
Thanks!
