09-09-2014 10:44 PM - edited 03-01-2019 11:50 AM
Hi,
We are setting up Windows Server 2008 R2 (64bit) on a new Cisco UCS C22 M3 server. We followed the Cisco guide to install a new Hard Disk in the new server and created virtual HDD( Array 0).
We have also downloaded and installed the recommemded storage drivers.
Unfortunately, the created virtual HDD is not available both the CIMC (Under Storage) and during Windows OS installation. Attached are screenshots of the issues identified.
Advice please? Thanks.
09-10-2014 05:30 AM
Hello,
Do you see the VD from the webbios? its better to have a TAC case raised with cisco to investigate else you could follow the document below to check the webios settings
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/raid/configuration/guide/RAID_GUIDE/MegaRAID.html
-
Siva
09-10-2014 09:44 PM
Hi Michael
You need to load the drivers, to do this you need to click in load drivers. You will see this option on the second screen you posted. You then have to load the ISO file that can be downloaded using the link below. To load the ISO you have to unmapped the OS ISO and map the drivers, once you map the ISO you will be able to look for the drivers by clicking on the browse button. Since you are using the embedded raid controller, you need to load the drivers inside the intel folder
File path is
Windows>storage>Intel>c600>w2k8>64.
once you load the drivers make sure to map the OS ISO again in the KVM and click refresh during the install
http://software.cisco.com/download/release.html?mdfid=284444317&softwareid=283853158&os=&release=2.0.3&relind=AVAILABLE&rellifecycle=&reltype=latest&i=!pp
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide