Hi,
I am confused about configuring the UCS FC Uplinks.
the setup is as follows UCS (2 fabric Interconnects - 2 different VSANS) --> Nexus 5k (2 for redundancy - each FI to a Nexus) --> EMC Storage
I have connected 2 FC ports from the Fabric Interconnect expansion module to the Nexus 5K
I am confused regarding the configuration on the port in the nexus 5K?
Fabric Interconnect is in Normal mode (not switch mode), how should I configure my port on the nexus? is it an F port? should I enable NPV on nexus?
is it right to configure the EMC Storage port as F port (on nexus) ?
I am still new to FC connectivity.
I appreciate if you can include a nexus 5K configuration template
Thanks
