Resolved! UCS C250 CIMC date shows 1970
Hello,for some reasons the date show after CIMC webbrwoser Login is shown as Current time: Sun Jan 11 22:18:00 1970How can I change this to the current date and time?-- Nick
Hello,for some reasons the date show after CIMC webbrwoser Login is shown as Current time: Sun Jan 11 22:18:00 1970How can I change this to the current date and time?-- Nick
I'm in the process of purchasing a Nexus 7K and I will have UCS (w/ 6120 FIs) linking directly up to it. I may also have some IBM BCs that have uplinks via a 4K switch. I was under the impression that either of these switch interconnects required an ...
I am very new to the storage world and would need some help.I am having issue at UCS integration with Brocade switch. The brocade switch is running FOC 6.4.1 and NPIV enable on the ports connecting to 6120XP. I I have done the pinning of VMware’s vHB...
hi... i just want to know if it's possible to have just 1 TB of HDD with RAID on it... so it's just one physical harddisk that is 1 TB...i've read that you have to have multiple HDDs for RAID...i appreciate all the help! ^^
Hi I want to export a Service profile or any configuration file from UCSM by using UCS API and after doing some changes in it, I have to import the same file again to UCS.The problem I am facing is that I need the configuration file in config mode...
I am considering configuring UCS to use TACACS but can't find any documentaion to suggest if the UCS would fallbackto Local when TACACS fail. One would assume that it would so any link or pointers would be appreciated. Thank you.
Where can I find a single UCS CHASSIS diagram along with fiber interconnects showin connection downstream to MDS and Nexus?
Hello,I just finished the "DCUCI" training class. I am not really sure how to do this.I need to connect our Tape library Dell PowerVault 132T which connects using FC cable to our UCS system. Previously it was connected to our CX300 FC Interconnects...
This is the Boot from SAN configuration:6248(2.0.1q)->9148->VMAXe. We are getting a message from vCenter “The ESX Host does not have persistent storage”. The original Hosts will Boot from SAN, but are seeing issues (Cannot see the storage in vCenter...
Hi all,I understand that system vlan allows traffic flowing for those vlan even if VSM is not reachable, and system vlan should NOT be normal virtual machine traffic vlan. In my deployment of a normal vSphere environment with N1kv, I am setting these...
Hi All,I have a customer who is implementing a new Exchange 2010 environment. They have a requirement to configure load balancing for thier Client Access Servers. The environment consists of VMware vShpere running on top of Cisco UCS Blades with the ...
Does the UCS now support 40Gbps uplinks on the 6100? If so, it is on the roadmap?Also, there have been recent upgrades to UCS annunced about 2 months ago...what are they?Thank you
Is there a way to log into the standby nexus 1000v when it appears that they both share one ip address?Thanks,BR
I am a bit of a newbie to UCS but getting up to speed quickly. We are considering the UCS solution for an upcoming infrastructure upgrade. I have a main data closet that would house UCS with two fabric interconnects and two chassis with several serve...
Hey,What is the difference between the 6100's and the nexus switches?I'm watching vids on UCS and it looks like both the networking and the fabric are on the 6100s Are the 6100s modules in the nexus switch? Are they completely serperate devices that ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-15-2024 11:16 AM | ||
08-15-2024 08:03 AM | ||
08-14-2024 07:32 AM | ||
08-02-2024 03:36 AM | ||
07-23-2024 08:42 AM |