Do I really need to open a case to do re-imaging of a UCS FI?

[m1xed0s]

I have a UCS FI I want to use for testing but for some reason it stuck in the initialization wizard...I want to re-image it but as far as I can tell, the re-imaging process is TAC only. Unfortunately there is no service contract associated with this spare/free FI to open a TAC case regards.

So is there any document available I can use to re-image FI myself? I do have the A bundle image.

[balaji.bandi · Accepted solution]

If you can able to do you can do, some people want to TAC assitance if they have support, sure what they doing correct. both works :

follow below guide :

https://community.cisco.com/t5/data-center-and-cloud-documents/how-to-recover-from-a-software-failure-on-the-6120-fabric/ta-p/3121751

[m1xed0s]

Perfect! Not sure why I did not find the article. I will give it a try. 

P.S. the three bin files mentioned in the guide are actually in the A bundle and just need to extract them using 7ZIP or similiar app.

[balaji.bandi]

Guide is just for reference, time to time installation files changes - please follow the version you looking to install.