cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1085
Views
0
Helpful
5
Replies

Error Service Profile

opnineopnine
Level 1
Level 1

Hi all,

When I try to add my service profile a get the following error. (please see screenshot)

For the MAC-Pool I have 256 mac-pool created.

Thank.s 

1 Accepted Solution

Accepted Solutions

Hello,

Instead of choosing "Embedded local disk" just choose "Add Local Disk" from the top of the list on the left.

Please mark the answer as correct if it was helpful.

Wes

View solution in original post

5 Replies 5

Wes Austin
Cisco Employee
Cisco Employee

Click Yes, and then check your vNIC and make sure they have MAC addresses and do not show as "derived". If they do, you need to select the vNIC/vNIC template and ensure a mac address pool has been assigned accordingly.

The advanced boot error may be due to the boot order you have configured. Could you list the configured boot order and the hardware/firmware you are working with?

Hello,

I just fixed one of the issues and know I got this new one.

@Wesley
Thanks for the previous tips.

Thanks. 

Hello,

Instead of choosing "Embedded local disk" just choose "Add Local Disk" from the top of the list on the left.

Please mark the answer as correct if it was helpful.

Wes

Hello,

Should I use "Add embedded local disk"?

thanks.

No, that is the problem. Choose "Add Local Disk" only.

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card