12-20-2015 05:49 PM - edited 03-01-2019 12:31 PM
I would like to have some assistance on enabling and configuring a Fiber Channel port on 2 of my UCS Fabric Interconnects. An external storage appliance will be connected to these ports.
Solved! Go to Solution.
12-20-2015 05:53 PM
Hi Mark,
If I'm not mistaken what you are asking is you want FC ports on 2 of your UCS FI that will be connected to a storage appliance (Direct connect storage)( Fabric Interconnect --> Storage Array).
A great guide on how to set this up is below.
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-infrastructure-ucs-manager-software/116082-config-ucs-das-00.html
Regards,
Qiese Dides
12-20-2015 05:53 PM
Hi Mark,
If I'm not mistaken what you are asking is you want FC ports on 2 of your UCS FI that will be connected to a storage appliance (Direct connect storage)( Fabric Interconnect --> Storage Array).
A great guide on how to set this up is below.
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-infrastructure-ucs-manager-software/116082-config-ucs-das-00.html
Regards,
Qiese Dides
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide