HDD status = Predicted failure
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-31-2018 09:53 AM - edited 03-01-2019 01:34 PM
Hi
We had an alarm on an HDD. The alarm says: "Predicted Failure - Moderate Fault " so we did the RMA and replace that HDD for a new one. Nevertheless, the alarm still appears. Here is the image of the alarm, note that the state says online, the fault is false, and the online, is true.
All the HDD leds are in green.
It is an ucs c220 M3 and the firmware version is 1.5(3).
Have you ever saw something like this?
Thank you!
- Labels:
-
Other Unified Computing System
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-31-2018 10:04 AM - edited 05-31-2018 10:08 AM
Greetings.
Try resetting the CIMC (admin, utilities), and see if the alerts remain after the CIMC is rebooted.
Probably wouldn't hurt to get the CIMC (and HDD) firmware updated to something more recent either ;)
Thanks,
Kirk...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-31-2018 10:07 AM
I will do that!
I will let you know if it works
Thank you
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-14-2020 05:20 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-14-2020 05:42 AM
Keep in mind that the raid rebuild can take a number of hours once the replacement drive has been inserted.
The raid volume/VD will still be degraded until the raid rebuild is complete.
Kirk...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-21-2024 07:56 AM
Hi,
Did you manage to solve this problem ?
