Hyperflex Upgrade

[saad_thabet]

I have the following componants :-

2  Fabric 6296 v 3.1(2b)

3  HX Node 220c M4s

1 blade server B200 M4

I/O module 2208 xp

HXDP 2.1 (1c)

esxi 6.0 u 3

vcenter appliance 6.0 u3 

Required upgrade HX cluster from 2.1(1c) to 3.5 (1a)

How can perform the whole upgrade with correct steps ??

[Kirk J]

Please open a TAC case, and make sure they have you run the pre-upgrade health check scripts from 

https://github.com/CiscoDevNet/Hyperflex-Hypercheck

You can directly upgrade HX from 2.11c to 3.51a (or better yet 3.52g), but you will run into a stepped upgrade requirement on UCSM for 3.12, as you need to upgrade to UCSM 3.13 or UCSM 3.2 prior to going to UCSM 4.0

Please see upgrade guide at https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/HyperFlex_upgrade_guide/3-5/b_HyperFlexSystems_Upgrade_Guide_for_VMware_ESXi_3_5/b_HyperFlexSystems_Upgrade_Guide_3_5_chapter_01.html#id_44289

Kirk...