04-22-2015 04:43 AM - edited 03-01-2019 12:09 PM
We monitor our C-Series UCS Servers using PRTG via SNMP, and the CIMCs on both our 240M3 & our 220M4 seem to be providing an incorrect status for all power supplies. Everything in the web UI and front panel reports OK so, I reached out the PRTG first assuming it was a problem with their sensor, but they had me walk OID 1.3.6.1.4.1.9.9.719.1.15.56.1 on both servers, and each of them returned the below.
I'm told this indicates two power supplies with a status of "Power Problem":
1.3.6.1.4.1.9.9.719.1.15.56.1.7.1 = "5" 1.3.6.1.4.1.9.9.719.1.15.56.1.7.2 = "5"
As well as this, which I'm told indicates a degraded status for each:
1.3.6.1.4.1.9.9.719.1.15.56.1.8.1 = "3" 1.3.6.1.4.1.9.9.719.1.15.56.1.8.2 = "3"
I haven't been able to find any documentation to confirm what the returned values mean though.
Solved! Go to Solution.
12-22-2015 12:25 AM
Hi Steve
I think you hit the following bug:
https://tools.cisco.com/bugsearch/bug/CSCun73331
In my case, the problem was fixed with the workaround:
Regards Andrin
12-22-2015 12:25 AM
Hi Steve
I think you hit the following bug:
https://tools.cisco.com/bugsearch/bug/CSCun73331
In my case, the problem was fixed with the workaround:
Regards Andrin
12-22-2015 03:55 AM
That's the bug...I wound up opening a case after not getting a response here, and they pointed me to it. I should've posted a link & the workaround afterwards.
Thanks!
12-22-2015 07:49 AM
If that answered your question.. could you please mark it as such for other users with the same issue?
-Kenny
11-06-2019 11:24 AM
I have same problem with CIMC firmware version 3.0(4l)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide