04-17-2018 01:49 AM - edited 03-01-2019 01:30 PM
Hello,
we recently did an update of our UCS Manager an the Fabric Interconnects. The firmware was raised from 3.2(2c) to 3.2(3a).
Before the update we could choose on our B200 M3, M4 and M5 server whether to use KVM Console via HTML5 or Java. Now this choice ist only available for B200 M5, therefore disabled for M3 and M4.
I did not read any announcements regarding this change in the release notes. Is there a reason why this was removed or a way to make HTML5 console working again for our older blade servers?
Regards
Martin
Solved! Go to Solution.
04-18-2018 02:35 AM
Apart from this can you try to upgrade one of your M3 and M4 blades to 3.2.1d firmware also and check if the Java option is coming up on that blade or not. The release notes says the software was introduce in firmware 3.2.1d.
04-17-2018 03:16 AM
04-17-2018 07:55 AM
04-17-2018 08:18 AM
I have asked one of my collegue to try the same in his lab and he is getting the option on B 200 M4. I would suggest opening a TAC case for the same as I am not familiar with any bug which has been recently open for this.
04-17-2018 10:15 PM
Thanks, I will contact our support and check back once I have a solution.
04-18-2018 02:35 AM
Apart from this can you try to upgrade one of your M3 and M4 blades to 3.2.1d firmware also and check if the Java option is coming up on that blade or not. The release notes says the software was introduce in firmware 3.2.1d.
05-15-2018 12:09 AM
I finally got the time to do some upgrades on M3 and M4 servers.
Once the CIMC firmware is raised the option to choose between java and html5 is back again.
We applied firmware 3.2(3a) and it works fine.
Thanks pranavgu!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide