Powertools for UCS scripts fan norxack stats

[dbrownad1]

Hello all,

Does anyone have an idea about how to get norxack stats from the fans on multiple IOMs with powertools?

[Jarret Gonzales]

Hello, 

I am unsure of how to review norxack stats using powertools, but I can provide you with an alternate solution. 

1) Download Tech Support files using the guide below. Be sure you are selecting the appropriate Chassis. 

- http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/115023-visg-tsfiles-00.html

2) Once downloaded, dig into the directory to locate the IOMs. They will have a directory listed similar to: IOCard1 or IOCard2

3) Navigate through the IOCard directory to CMC > LOG and locate 'i2c.log'

4) Within this file you can search 'norxack' to find the counters for different components within your environment. Example below:

segment 1 chassis

norxack 58

pca9541seterr 27

wait_gt_deadline 9794

segment 2 blade

segment 3 fan

wait_gt_deadline 2

segment 4 psu

wait_gt_deadline 1

Hope this helps someone! 

- Jarret Gonzales

[Keny Perez]

Correct Jarret, or you can also do it through the CLI with the blow commands:

#connect local A|B  (choose A or B to check the IOM attached to that fabric Interconnect)

#connect IOM #   >>> # will be the chassis #, no need to specify the IOM as only 1 IOM will be connected to the FI specified in the prev command

#show platform soft cmcctrl showi2c

-Kenny