08-17-2020 12:11 PM
Hello Team,
I am having a UCS C 220. While trying to launch KVM console am getting "No Signal" error displayed on the console screen. Java version used is 6u17.
Please assist.
Regards,
Alin
08-17-2020 01:20 PM - edited 08-17-2020 01:21 PM
You usually see that if the overall power is off.
I have seen some similar issues, if resolution was set really high.
What generation of C220 is this? M2, M3?
Kirk...
08-17-2020 01:48 PM - edited 08-18-2020 02:14 AM
Generation is M3.
The power is not off. And previously i was able to launch the console successfully using latest java version (8u) and by disabling certificate check. When using java 6u17 am facing this issue.
Any help would be great.
08-18-2020 04:06 AM
Depending on the CIMC firmware version, those may not work with java 6.
See a 3.0 release notes section for min requirements: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/b_UCS_C-Series_Release_Notes_3_0_4.html#id_18494
The management client must meet or exceed the following minimum system requirements:
Sun JRE 1.8.0_92 or later (Till 1.8.0_121) <<<<<<<<<<<
HTML based interfaces are supported on:
Microsoft Internet Explorer 10.0 or 11
Mozilla Firefox 30 or higher
Google Chrome 38 or higher
Safari 7 or higher
Kirk...
08-28-2020 01:35 PM
Hi,
Issue got resolved by pressing the Enter key after the "No Signal" screen is displayed. Now am able to login to console.
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide