07-11-2011 03:07 AM - edited 03-01-2019 09:59 AM
Is there a way to remotely rerun the initial setup process on a fabric interconnect over SSH without erasing the config?
Solved! Go to Solution.
07-11-2011 03:51 AM
Hi Simon,
You can only run the initial setup via a non SSH interface. You can run it remotely if you have access to the console port of both the FI.
For the initial setup you will have to erase the config and let the FI and cluster re-configure.
./Abhinav
07-11-2011 03:51 AM
Hi Simon,
You can only run the initial setup via a non SSH interface. You can run it remotely if you have access to the console port of both the FI.
For the initial setup you will have to erase the config and let the FI and cluster re-configure.
./Abhinav
07-11-2011 03:58 AM
I feared as much, thanks for confirming.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide