Service profile Error

[morphotek]

I am getting the below error when I create a service profile and click finish.

failed creating service profile service profile (profile name). Property order of ether-dynamic-vf-257 is out of range

I'm sure that I did something wrong but have not been able to identify what that is or what the error message means.  Can anyone point me in the right direction.

[Kirk J]

Greetings.

Are you trying to create dynamic vnics?

If so, the max is 256.

Please see 

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/Reference-Docs/Configuration-Limits/3-1/b_UCS_Configuration_Limits_3_1.html#reference_6A3C0158393549E5A3E3F87002234145

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/vmware/gui/config_guide/b_GUI_VMware_VM-FEX_UCSM_Configuration_Guide/b_GUI_VMware_VM-FEX_UCSM_Configuration_Guide_chapter_010.html

You will need to reduce the number of dynamic and physical vnics on the service profile.

Thanks,

Kirk...

[morphotek]

I am trying to create Dynamic vNICs and in the policy for that I have the number currently set to 128 though I had tried with the default value of 54 and had gotten the same error.

So I was more thinking that I missed a step somewhere prior to the service profile but I'm not sure as to what.

[morphotek]

As an update I get the same error even if I select no vNICs for the service profile.  This error is definitely confusing me as to the source of the error, I have yet to find anything on Cisco's website that references the error. 

[morphotek]

Deleting the Dynamic configuration policy completely resolved my issue