Unified Computing System Discussions

I am trying to add a second direct connect storage array to my UCS (assuming this is supported). I think the only thing I am missing is applying the Storage Connection profile to the San Connectivity Policy.   Does this require the blades to be reboo...

We want deploy Expressway E on B6M server, however, beside management port, there has only 2 port available for DMZ internal and DMZ external. So we come up with a question, if we assign EXSI's IP address in same subnet with CIMC, is it possible to u...

Hi, we are starting to use Disk Group Policies and Storage Profiles. This is a pretty cool feature. Looking at Disk Group Policies I have the option to specify some very specific configuration items or just use the "Platform Default". As we are using...

I have a c240 M4 with sas drives for backup storage and ssds on the riser to install server on. My problem is that no matter what I have tried the OS installs on the ssds but puts the system reserved partition on the sas drives.  

Hi,   we are using "UCS 1300GB Fusion ioMemory3 PX" cards in our C240-M4S servers and are always running very old versions of Oracle Linux because the UCS driver bundle is only supporting old OS / kernel versions.   In times of staying up to date reg...

I used the Shutdown Server option under Action but the server is just hung there, and i can't KVM into it to see what's going on.  this is a test blade server, i just need to power it off any way i can.  

Hi EveryoneI need some information about Cisco UCS C240 application capabilities. What I mean that Cisco BE7K support up to 10 application  and BE6K also support up to 6 application may i know that  what is the Cisco UCS C240  application capacity ?C...

  Hi,   I'm new to UCS and am trying to figure out if there's a way to access the individual server console via UCS CLI.   If so, how can I access the console?   For example, I want to access the console to the single user mode on a Linux server.   T...

UCS : 5108 with M2 and M3 bladesSTG : NetApp (iscsi)VM : Vmware 5.0I've gotten iscsi boot working with VMware 5.0 and have run into a couple of issues. Hopefully you guys can help me out.1) I've got 2 iscsi vNICs (for redundancy purposes) setup in my...

We have the Dell Compellent Storage (SC800 )directly  attached to FI  System details.. - Cisco UCS 5108 Chassis - FI 6248UP Ports for the storage configured as Appliance ports - Qos System class Paltinum created with MTU 9000 and enabled. - Appliance...