Solved: Re: UCS B / UCS manager Upgrade 1.3 to 2 issues

hans.velez · ‎07-12-2012

hi everyone,

i'm having issues with the download of the image to the fabric interconnect, in event file goes this message

Description: [FSM:STAGE:STALE-FAIL]: deleting downloadable ucs-k9-bundle-infra.2

.0.3a.A.bin on local(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:DeleteLocal)

Affected Object: sys/fw-catalogue/dnld-ucs-k9-bundle-infra.2.0.3a.A.bin

Trigger: Special

User: internal

Cause: Transition

Code: E4195295

Creation Time: 2012-07-12T20:36:19.006

ID: 74438

Description: [FSM:STAGE:REMOTE-ERROR]: Result: end-point-failed Code: unspecifie

d Message: End point timed out. Check for IP, password, space or access related

issues.

(sam:dme:FirmwareDownloaderDownload:DeleteLocal)

Affected Object: sys/fw-catalogue/dnld-ucs-k9-bundle-infra.2.0.3a.A.bin

Trigger: Special

User: internal

Cause: Transition

Code: E4195295

Creation Time: 2012-07-12T20:36:18.995

ID: 74435

Description: [FSM:STAGE:FAILED]: downloading image ucs-k9-bundle-infra.2.0.3a.A.

bin from 10.8.224.244(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:Local)

Affected Object: sys/fw-catalogue/dnld-ucs-k9-bundle-infra.2.0.3a.A.bin

Trigger: Special

User: internal

Cause: Transition

Code: E4195293

Creation Time: 2012-07-12T20:36:18.995

i had a SFTP / SCP seber on the same network of the fabric, but i can't get done the download. the server is a host/PC, no antivirus and firewall that cant block the transmission on the side of the host/PC

any ideas??

thanks for your help!

Shahzad Arain · ‎06-20-2013

Hi Hans,

You can follow guide to upgrade UCS manager from following link. Check that you are doing correct steps.

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.3/to2.1/b_UpgradingCiscoUCSFrom1.3To2.1.html

View solution in original post

abbharga · ‎07-12-2012

Hi Hans,

A few things to check:

* Do you have any previous job for the same destination host ip in the download section? If so can you delete it and try again?

* And have you made sure there are no space issue on the FI / the username-password is correct?

* In case this STFP / SCP client has not worked for you can you try using an alternate protocol and client? e.g. tftf with using the tftpd32.exe as the client.

./Abhinav

hans.velez · ‎07-14-2012

Hi Abhinav,

bout the things you say to check:

* Do you have any previous job for the same destination host ip in the download section? If so can you delete it and try again?

YES, WE HAVE OLDER TASK FOR DOWNLOAD AND WE EREASE IT ALL AND DON'T WORK

* And have you made sure there are no space issue on the FI / the username-password is correct?

MAYBE IN THIS ITEM WE DON'S HAVE ENOUGH INFO WE GOT THIS FROM DE FI (THE FILE SIZE WE ARE TRAYING TO SEND IS 550 MB):

ucs1-A /fabric-interconnect # sh storage

Storage on local flash drive of fabric interconnect:

Partition Size (MBytes) Used Percentage

---------------- ---------------- ---------------

bootflash 8785 10

opt 1916 2

workspace 277 2

ucs1-A /fabric-interconnect # sh environment

Fabric Interconnect A:

Operability: Operable

Fabric Card 1:

Threshold Status: N/A

Overall Status: N/A

Operability: N/A

Power State: N/A

Thermal Status: N/A

Voltage Status: N/A

Fabric Card 2:

Threshold Status: N/A

Overall Status: N/A

Operability: N/A

Power State: N/A

Thermal Status: N/A

Voltage Status: N/A

ucs1-A /fabric-interconnect # sh detail

Fabric Interconnect:

ID: A

Product Name: Cisco UCS 6120XP

PID: N10-S6100

VID: V01

Vendor: Cisco Systems, Inc.

Serial (SN): SSI144906KJ

Revision: 0

Total Memory (MB): 3549

OOB IP Addr: X.X.X.X

OOB Gateway: X.X.X.X

OOB Netmask: X.X.X.X

Operability: Operable

Current Task:

* In case this STFP / SCP client has not worked for you can you try using an alternate protocol and client? e.g. tftf with using the tftpd32.exe as the client.

We are trying the upgrade with a siftware bundle (550 MB), TFTP has a file size limitation of 32 MB. The firmware bundles can be much larger than that.

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.3/to2.0/b_UpgradingCiscoUCSFrom1.3To2.0_chapter_011.html#task_C8E850B883D741BFBEF0FBBA409C6CB7

abbharga · ‎07-14-2012

Hi Hans,

On the client you are using to upload the file, do you see a request coming from the FI or three is no request at all?

In case there is no option to see the client request you can run wireshark or something to check for the request coming in.

If this is holding your upgrade activity, feel free to open a TAC case and we should be able to help you.

./Abhinav

tsantoyoc · ‎04-11-2013

Hi Hans,

Were you able to solve this issue?

I'm having the same problem upgrading from UCS 1.3 to 2.1, but it seems like the traffic never goes to the tftp server but i don't have firewalls or any device stopping the traffic.

Shahzad Arain · ‎06-20-2013

Hi Hans,

You can follow guide to upgrade UCS manager from following link. Check that you are doing correct steps.

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.3/to2.1/b_UpgradingCiscoUCSFrom1.3To2.1.html

hans.velez · ‎11-28-2013

Hey Tobias,

we were reviewing the FI upgrade in stand alone mode and was not the best way, put it in another cluster with FI and upgrade goes fine
Sent from Cisco Technical Support iPad App