12-10-2018 06:49 AM
Hi All,
We have a strange situation. On one of the Blades in the UCS Chassis BLINKS the Health Led in GREEN. There is not any events in the logs. The other Blades in the chassis are ok (Green Led lights)
B200 M5 Blades (Fw version: 3.2.3h)
Could somebody explain this and what cause that?
Thanks,
Gabor
Solved! Go to Solution.
12-11-2018 03:03 AM - edited 12-17-2018 01:04 AM
12-10-2018 07:20 AM
Hi, it's a strange behaviour.
Are you sure of health LED? Should be solid green.
Could be the power supply LED?
Can you reload the UCS?
Regards.
12-10-2018 11:43 PM - edited 12-10-2018 11:46 PM
Hi,
Sure it is health LED not the power supply.
It cannot be reloaded now..
12-10-2018 07:45 AM
Hi @Gabor,
Please provide the below output from CLI
#connect cimc x/y (where x/y is blade slot)
#sel
#sensors
Regards,
MJ
12-11-2018 03:03 AM - edited 12-17-2018 01:04 AM
Reseating the Blade solved the strange LED status.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide