Good afternoon guys!
I have been helped by the community already with a previous issue so thank you all for that sincerely!
At the moment I have 8 drives being read by my C220 M4 Server with a Raid HBA Card, I want to access the raid configuration but nowhere while booting does it mention anything to access "RAID" or "RAID Configuration"... I cannot for the life of me access anything closely related to RAID. I saw another post mention that they turned also turned on LSI software in BIOS>Pcie settings...and then a RAID config prompt would show up such as CTRL+M/CTRL+H/CTRL+ R but nope... I only see a CTRL + C for Avago Technologies SAS configuration.... and the regular f2 bios, f6 boot options etc....
The server is stuck on old firmware 2.0 something, so when i try to access CIMC through the web, it gives me a prompt to download flash player... I tried downloading the firmware update 3.0 and 4.0 (https://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-c-series-rack-mount-standalone-server-software/series.html#~tab-downloads) at this page and creating a bootable drive with RUFUS software but nope... As the wizard setup is copying "firmware and tools" i soon after get an "critical error" and the server just reboots. I have tried this with 2 different USBs that i checked their health on windows through "chkdsk /f " and it said "no errors were found".
I have been trying to get a proxmox server going for it but i have had little luck :((
Thank you for your time sincerely!
