03-22-2014 12:25 PM - edited 03-01-2019 11:35 AM
hello We have cisco ucs server with 2 LAN cards and layer 3 switch .
- i have multipal L3 vlan on L3 Switch
- UCS server is also connected with L3 switch as an Access port
-on ucs server , we have virtual switches .
what should be the configuration of UCS and Cisco L3 Switch , so that all virtual switches can communicate with L3 switch connected with ucs server .
03-22-2014 01:08 PM
Can you be more specific, best to post a diagram of the topology
I understand, that you have C-2xxx-M servers, without a fabric interconnect, connecting to a Cisco switch ? correct ?
On the server, you have a hypervisor (ESXi ?) and therefore a virtual switch ?
Is the server dual homed to 2 Cisco access switches ?
03-22-2014 01:53 PM
Yes , You are right with the topology and C-2xxx-M with 2 NIC (Teaming )
C-2xxx-M -----|------Cisoc L3 Switch |--------Core Switch (2 core Switches)
i have 2 core switches for redundancy , please let me know the best configuration shoud be b/w C-2xxx-M and L3 switch .
03-23-2014 01:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide