Resolved! Jumbo Frames and DF bit
Enabling Jumbo Frames on UCS doesn't seem to set the DF bit ? correct ?Can this be set by UCSM and/or CLI ?
Enabling Jumbo Frames on UCS doesn't seem to set the DF bit ? correct ?Can this be set by UCSM and/or CLI ?
This link to the release notes of 2.2(1b) is broken:http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.htmlCan someone provide a working link or have it fixed?
We've been testing iSCSI booting on UCS with 2.0(1t) and the Palo M81KR with an EqualLogic PS6010. We are connecting through a 10GbE switch via an uplink port. However, we've hit a snag and want to see if anyone else has gotten around this. The EQL s...
Can someone explain what this error message means ? I cannot find it in http://www.cisco.com/en/US/docs/unified_computing/ucs/ts/faults/reference/UCSFaultsRef.pdfThanks Walter.
Hi,So I'm trying to set up email notifications for one of our UCS setups and I'm running into some issues, or rather, im not sure what im running into. Let me paint a picture and see if anyone can help me figure out what is wrong. I am under the a...
Hi All,I need to know from which link can i get versions of BIOS , CIMC , Host firmware packages versions ... I am making LLD so i need to include this informationAnother question i have is that .. I have M81KR with B230 M2 cisco compatibility matr...
Is there a rule how big a boot lun must be for a W2012 server installation; server memory size, e.g. 64GB / 128GB / 256 GB / 512 GBI have seen, that for a 512 GB size, a boot lun of 60GB is by far not enough.
While planning for an upgrade from 2.0 -> 2.1 we noticed the warning about Default Zoning not being supported in 2.1(1a) and later releases. Is it possible to reconfigure and disable Default Zoning without causing any disruptions?The system is runnin...
Good days Gurus,I am being tested in the emulator of UCS, the characteristics of Local Zoning of the fabric. The versions are not saved! that I am using are :Cisco_UCS_Platform_Emulator_2.1.1ape2 and Cisco_UCS_Platform_Emulator_2.1.3aPE1.The steps th...
Hi,In our environment, there are 4 B440 servers using vic 1280. When i tried to figure out which FC uplink port each server is using, 3 servers show the FC VIF Path is unpinned (picture attached), only one shows the current FC Port (1/30).Is anyone h...
I have some extra memory in a B440 M2 that I would like to reuse in another blade. Other than the B440 M2s, I have B200 M2s and B230 M2s. Can I use B440 M2 memory in either of these blades??Thanks,John
Hi All,I have a customer who is look to double the memory allocation in their B200 M3 Server blades.At present they have deployed 8 x UCS-MR-1X162RY-A (16GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v) so wanted to verify if there are any concerns ...
Hello,I am trying to assist my customer develop a tool to generate inventory/health reports and part of that involves logging into the C-series system using PowerTool CLI - Customer is able to login by using local authentication (user-id and password...
Dear Cisco Team,One of our client has requested for an HDMI Port in the Cisco UCS Servers. Can anyone please help me with this? If yes, please let me know in which Cisco UCS Server is it available?Regards,Farhan.
Hello, i have a problem with UCS C220 M3 with 4 SATA drives and UCS-RAID-9266CV controller.I try to install ESXi on this server.- I have download Cisco customization *ISO ESXi image ( try different versions 5.0, 5.1,5.5)- Setup CIMC, set ip parameter...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 12:18 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM |