Re: UCSC-C240-M5SX - Need Windows driver for Marvell Storage Controlle

asadou · ‎10-04-2021

I got new Cisco Standalone UCSC-C240-M5SX (with GPU) installed and configured.

However, Windows Server 2019 detected an “Marvell Storage Controller” which we have challenge to install driver.

Product Name: Cisco Boot Optimized M.2 Raid Controller

Slot: MSTOR-RAID

Firmware Package Build: 2.3.17.1014

Product ID: Marvell

Device ID: 0X9230

Sub Device ID: 0X0251

Cisco BIOS Version: C240M5.4.1.3i.0713210713

asadou · ‎10-04-2021

I tried UCS-Rack Windows Drivers from Cisco Website, but no luck!

ucs-cxxx-drivers-windows.4.2.1h.iso

ucs-cxxx-drivers-windows.4.1.3p.iso

ucs-cxxx-drivers-windows.4.0.2n.iso

ucs-cxxx-drivers-windows.3.1.3j.iso

Kirk J · ‎10-04-2021

Checking the HCL tool at https://ucshcltool.cloudapps.cisco.com/public/# , shows that for the m.2 raid controller:

Make sure you have installed the 'chipset' drivers, and rebooted, as many times the 'included' drivers won't correctly identify without the chipset drivers being present.

Kirk...

asadou · ‎10-04-2021

Yeah, I did that. I installed the "CHIPSET" drivers and rebooted the server many times as I had to install the missing Windows Patches. But that did not fix the issue with "Marvell Storage Controller" it is still appear as "Unknown"

I also checked "Marvell" website but no luck!

Kirk J · ‎10-05-2021

Might need to open a TAC case then.

I'm assuming the 'raid 1' functionality is actually working in that you were able to install windows 2019 to the VD made up of the 2 drives?

Kirk...

asadou · ‎10-05-2021

I am unable to open case with Cisco now, I have to wait until the service date take affect after two weeks or so

It would be nice if someone would help me and provide the URL for Marvell Storage Control Driver

I am surprised that Cisco did not provide the missing driver in:

ucs-cxxx-drivers-windows.4.2.1h.iso

HansLeys12104 · ‎10-11-2021

Hello everyone ,
Having the same problem.... Tried all iso's, but no success.

And also Marvell support download ... nouga balls

Open one INC with NTT support

Disel · ‎03-11-2022

Hello community,

is there no solution to this? I have the same problem on 4 of our new C220 M6 servers and Cisco support keeps referring me to Microsoft when looking for the drivers. It is beyond me that new servers are not tested for this behavior.