The only way I can get a mouse and keyboard to work is via vKVM / remote console. no amount of locally-attached USB mice or keyboards do anything once HUU is fully booted. Any ideas? I've tried it on multiple systems with the same behavior. Those...
Hi,
I'm seeing the following on my FaultLog on my UCS420
sys/rack-unit-1/board/storage-SAS-SLOT-5/pd-3 equipment-degraded Storage Local disk 3 is degraded: please check if rebuild or copyback of drive is required
It caused my CENTOS 7 that's in...
Hi all,
i have been tasked with converting our LDAP to LDAPs on our UCS'.
They are currently running 4.0(4l)
ive tried finding information online, but nothing concrete.
Am i right in thinking that in order to convert LDAP to LDAPs i will have to get ...
Hi All,
we have customer that will upgrade the system, the hardware is BE6K M5 , what ESXi should I use? should I use the ESXi Cisco Custom version or the standard ESXi version? thank you in advance
Hi,
We have recently installed an Nvidia P6 R graphics card into 2 blades - both M5 v 2 running firmware 4.0(4l).
Each blade is in a separate domain - working card in a 6454, not-looking-like-its-working card in a 6332.
1 blade has taken the graphi...
I am trying to upgrade an environment with ~700 LUNs to vSphere 7.0. After applying the UCS firmware 4.1(3) to the blade I have then upgraded from ESXi 7.0 from 6.5U3. What I have noticed is that numerous LUNS are missing. This appears to be since...
Hello,We are implementing the hyperflex stretched Cluster of HX240c M6 All Flash Node,5 hx-servers at DC , 5 hx-servers at DR & 2 edge server for witness VM.now our DC site & witness site is ready to configure HX server, But DR site is not ready.so c...
Hi,VIC 1455 installed on C480 M5 UCSM managed and running RHELAll of a sudden, one of the host eth interfaces ( trunk VNIC ) gave up .. i.e. stopped responding and "enic" drive tried to reset it as it considered it as "hang" as well. Rebooted the hos...
I'm having an odd issue with a server (standalone C240 M4L) where the SAS SSD's are working fine, but using SATA HDD's causes TERRIBLE performance, and getting a bunch of "Unexpected sense" errors in the storage log, before it marks the SATA HDD driv...
I have the following vSphere 6.7U3 host hardware running under UCSM. The host was built using the ISO " VMware-ESXi-6.7.0-14320388-Custom-Cisco-6.7.3.1":UCSC-C220-M4SName:Adapter1Model:Cisco UCS MLOM 1227PID:UCSC-MLOM-CSC-02Running Version:4.4(1e)Pac...
I've been booting my B200-M1 (and M2) blades from the SAN with no issues, but when I try it with the B440, it just hangs. I know it sees the LUN because when I boot from the install ISO I can select the lun as the install location. I'm also using the...
Does anyone know what Cisco's stance is with utilising VMWare SCAv2 on UCS HyperFlex?VMWare's HTAwareMitigation analysis tool throws warnings for the HyperFlex Storage controller VM's as they have "affinity to the physical processors" and tied to a h...
My C240 has a 2X Disk RAID1 boot LUN, 6x disk RAID10 LUN and 4x disk RAID5 LUN. I've installed WIndows Server 2019 STD.In Windows Computer Manger, I can ID the boot drive, Disk 0, as the RAID1 LUN. But Disk1 & Disk 2 are both 2679.40GB drives and I'm...
