cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
933
Views
0
Helpful
2
Replies

windows 2008 r2 ethernet problem on UCS

Tejas Kunte
Level 1
Level 1

i have installed windows 2008 R2 on a B440 M2 and having issues with the network. not able to ping even the default gateway or any other servers on the same network/vlan

an esx server in the same VLAN works fine.

i know this is only partial information, but was wondering if there was some config off the top that i am missing

p.s. my chassis has the palo card

1 Accepted Solution

Accepted Solutions

Daniel Laden
Level 4
Level 4

The most common issue I see in this instance is that the servrice profile associated with Windows does not have the associated vlan marked as native.

- Confirm the service profile has the appropiate vlan

- Confirm the vlan is marked as native

- Can the windows OS ping other hosts on the same subet in the same UCS chassis

- Is there an impact if you force traffic over fabric A or B.

HTH,

Dan

View solution in original post

2 Replies 2

Daniel Laden
Level 4
Level 4

The most common issue I see in this instance is that the servrice profile associated with Windows does not have the associated vlan marked as native.

- Confirm the service profile has the appropiate vlan

- Confirm the vlan is marked as native

- Can the windows OS ping other hosts on the same subet in the same UCS chassis

- Is there an impact if you force traffic over fabric A or B.

HTH,

Dan

that worked !!!!

i had not marked the VLAN as native

thanks

Review Cisco Networking for a $25 gift card