07-11-2018 09:17 AM - edited 07-09-2019 09:44 AM
Cisco UCS Platform Emulator, Release 3.2(3ePE1)
CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported by Cisco TAC. UCSPE backups should only be imported to UCSPE domains.
New Features and Significant Changes in Cisco UCS PE, Release 3.2(3ePE1)
Hardware Feature Summary
Please see the Release Notes for a complete list of supported Hardware. Below is a summary:
Known Limitations
IMPORTANT CONFIGURATION NOTE: Backup/Import of UCSM Configuration
Firmware Management: UCS PE supports uploading B-Series and C-Series server firmware bundles. Because of the large file sizes of the firmware bundles, UCS PE only supports uploading of stripped-down versions (link below). Stripped-down versions include only the firmware metadata (not the actual firmware binaries).
Download Instructions
MD5 hashes for downloads:
Great - thank you @jig
Seems like the links are removed:
"This shared file or folder link has been removed."
Chassis Templates are not working for me at all.
UCSPE 3.2.3e.
Hi, I'm using the latest emulator in VMware workstation 12.5 however I'm unable to generate a Key Ring certificate request after following the instructions multiple times. As you can see the Request is empty.
ucspe /security/keyring # show certreq
Certificate request subject name: ivan.example.com
Certificate request ip address: 0.0.0.0
Certificate request FI A ip address: 0.0.0.0
Certificate request FI B ip address: 0.0.0.0
Certificate request e-mail name:
Certificate request ipv6 address: ::
Certificate request FI A ipv6 address: ::
Certificate request FI B ipv6 address: ::
Certificate request country name:
State, province or county (full name):
Locality name (eg, city):
Organisation name (eg, company):
Organisational Unit Name (eg, section):
DNS name (subject alternative name):
Request:
ucspe /security/keyring
Any ideas? Can anyone else reproduce this issue?
Ivan
I had the same problem. Perform the following:
Step 1 UCS-A# scope security
Step 2 UCS-A /security # scope keyring default
Step 3 UCS-A /security/keyring # set regenerate yes
Step 4 UCS-A /security/keyring # commit-buffer
I was able to use https and get to https://cluster-ip/config
Thanks jzitcovi.
I'm getting this error on a non-default keyring. Any workarounds for this use case? Or does the emulator with Https only work with the default keyring?
I ran through your commands however when I attempted to create the cert req for default keyring the CSR field is still empty when running show certreq
Ok, thanks for the update. If you can point to a version of the emulator that doesn't exhibit this issue that would be great.
Pretty sure the emulator is EOL. Spoke to someone from Cisco @ Cisco Live this year.
@jzitcovi - Good news. Do you have a target release date?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: