The most common issue with Discovery is when a rack server server was used for something prior to integration or has some setup on the CIMC. Try connnecting a Keyboard and Mouse to the system and Press F8 to enter the CIMC configuration. Then set the CIMC to factory defaults. After you do this connect to the FI again and try discovery.
The most common issue with Discovery is when a rack server server was used for something prior to integration or has some setup on the CIMC. Try connnecting a Keyboard and Mouse to the system and Press F8 to enter the CIMC configuration. Then set the CIMC to factory defaults. After you do this connect to the FI again and try discovery.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
