acampbell

Hi,We want the ASA to send traffic for vlans 20 & 30 to the L3 switch so this is the ASAs "inside" n...

Hi, You will need to add the route I mentioned on the L3 switch to point at the ASA DEST/SUBNET MASK...

Hi,If your printer & server are using the ASA as their default gateway (IE 192.168.1.1) the ASA will...

Hi,Look here:-https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/srw248g4p/administration/...

Hi, You need to point a default route out to the firewall interface on VLAN 1DEST/SUBNET MASK NEXT H...

Hi, You have missed  impedance complex1from voice-port 0/0/1

Hi,This looks like you are hitting bug CSCur17744 or similar.High CPU increases when enabling flexib...

Hi,When you try to shut then open the ports/channel on the cisco 3750 do you see any loggs you could...

Hi, Have you actually created the vlans on the switchesOn a VTP server switch or on then all if in v...

Hi,Have a read at this from TAC.https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/8021x/...

Hi,The config guide for your 3560 might be a good place to start your learning.I have picked the pop...

Hi, Try Username cisco;(with the semi-colon ;)Password  CAT2424L9ZM