As I mentioned before, the link is for your reference to understand the congetion of FR. If we do not have more info., we cannot provide suggestion to you. Slow performance may be caused by routing protocol, hardware issue, CPU loading, etc. You can ...

It really depends on the application that is running on the WAN. What application do your user experienced slow performance ?You can check the frame-realy interface to check is there any packet drop, BECN or FECN / congestion.Check below for the FR t...

IC, what I suggest not to use controller-based AP for site survey. Use an anonymous/standalone AP for easier configuration.Yes, I suggest to setup an AP and use survey tool to test it. I really can't tell how much power should be used. It depends on ...

I believe if it is running on L3 LWAPP (and the WLC supports), then you can use WAN for WLAN. However, it may be an impact to the WAN bandwidth to have remote LWAPP AP. I suggest to install a WLC module at the router to act as a local WLC. Or use ano...

Although it is outdoor and I believe we have to carry the site survey as similiar as indoor. e.g. use an AP and site survey tools.Check below quoted from Cisco for the issues of outdoor site survey :***Quote startSite Surveys Every network applicatio...